
8
Administrator Mode Operations
When the necessary adjustments are finished, touch [Enter].
4Using the black grids as references, check for shifts in cyan, magenta and yellow.
5In the Expert User’s Mode screen, touch [Color Shift Correction] for the
color that you wish to adjust.
Touch [X], [Y] or [θ] for the adjustment that you wish to make, and then touch
and
to specify the desired adjustment value.
Continue printing the test pattern and making adjustments until there no longer is a color shift. When the
necessary adjustments are finished, touch [Enter].
The example below shows the adjustment for cyan; however, the other colors should be adjusted in the same way.
m If the lines are shifted in the X- direction:
Touch [X], and then align on the black grid.
|