GE PGP989SN dimensions GE Profile 30 Downdraft Gas Cooktop, Specification Revised 4/09

PGP989SN

GE Profile™ 30" Downdraft Gas Cooktop

Dimensions and Installation Information

Wall Installation: Wall installations require 25” countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting. Requires special offset adapter JXRW89.

Peninsula or Island Installation: For peninsula/ islands a minimum 26” countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation.

Slab Installation: For peninsula or island installation and rear wall ducting, 6” PVC duct or locally approved piping should be used if installing under a poured concrete slab.

Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data.

Note: These cooktops are approved for indoor use only.

227⁄16ʺ

(229⁄16ʺ SS)

22ʺ

201⁄2ʺ

20-5/8

25		28-7/8
	1-7/8"	16
*U.L. Requirement.	MIN. Required*

Note: A 5" minimum spacing to adjacent side wall is required

297⁄8ʺ

(30ʺ SS)

283⁄4ʺ

9

C

L 4

20

23⁄16ʺ

(21⁄4ʺ SS)

10-1/2

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

*Note: A 5" minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches.

Listed by

Underwriters

Laboratories

Specification Revised 4/09

230285