Kyocera KM-C1530 manual To set the PRT Area Dup. Left Margin parameter

Administrator Mode Operations

8

To set the “PRT Area (Dup. Left Margin)” parameter

This parameter can be used to adjust the printing position in the secondary scanning direction when making double-sided copies.

This parameter can be set between –3.0 mm and +3.0 mm, in increments of 0.2 mm.

This adjustment affects the main unit and any optional paper drawers.

The left margin of the print area for the first and second paper drawers is adjusted during manufacturing of the copier. Normally, the left margin will not need to be adjusted.

As an example, the following procedure describes how to adjust the left margin for the fourth paper drawer.

Note)

4In order to print a test pattern on paper loaded into the paper drawer that you wish to check and adjust, the appropriate paper drawer must be specified in advance. Refer to “Selecting the Paper Source” on page 5-4.

1Load paper (11 × 17L) into the fourth paper drawer.

2In the Expert User’s Mode screen, touch [2/2], and then touch [PRT Area (Dup. Left Margin)].

The Dup. Left Margin screen appears.

3Touch [4th Drawer], and then press the [Start] key to print out the test pattern.

KM-C1530 8-31