Utility Mode Operations

7

To set the “Sleep Mode” parameter

If the printer controller is not installed, this parameter can be used to specify the length of time after the last operation until the copier automatically turns off.

If the printer controller is installed, this parameter can be used to specify the length of time after the last operation until the copier automatically enters a standby mode (Energy Saver mode).

The default setting in either case is “30 min.”

The Sleep mode can even be turned off. For more details, refer to “Turning off the Sleep function (“Disable Sleep Mode” Function)” on page 8-15.

1In the User’s Choice screen, touch [Sleep Mode].

2Using the keypad, enter the desired number of minutes, and then touch [Enter].

?Do you wish to change the number of minutes entered?

ÜPress the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes.

3In the User’s Choice screen, touch [Exit].

KM-C1530

7-17

Page 167
Image 167
Kyocera KM-C1530 manual To set the Sleep Mode parameter