Administrator Mode Operations
b
b: 3.0 mm ± 1.0 mm
8
mCheck that the left margin of the printed test pattern is 3.0 mm.
m If the left margin is not as
specified, touch 
and 
to adjust it, and then touch [Enter]. Setting a higher positive number makes the margin wider; setting a higher negative number makes the margin narrower.
mRepeat step 3 until the left margin meets its specification.
?What is the standard setting?
Ü Before adjusting the third or fourth paper drawer, enter the
same adjustment value for the first or second paper drawer and check the test pattern.
4In the Expert User’s Mode screen, touch [Exit].
5In the Administrator Mode screen, touch [Exit].
6In the Utility screen, touch [Exit].
|
