5

Basic Operations

4Adjust the paper guides to the size of the paper, and then load the paper so that the front side of the

paper faces down. Lightly slide the paper into the feed slot as much as possible so that it is ready to be fed into the copier.

? Are the recommended overhead projector transparencies being used?

ÜWhen using the recommended

overhead projector transparencies, load them as described on page 3-17.

5Make sure that the screen that allows you to select the manual bypass tray paper size is displayed, check that the desired paper size is selected, and then touch [Paper Type].

6Touch [OHP Film], and then touch [Enter].

7Specify any other necessary settings.

m Zoom (Refer to page 5-14 for more details.)

m Original Image Type (Refer to page 5-18 for more details.) m Density (Refer to page 5-20 for more details.)

8Press the [Start] key.

5-10

KM-C1530

Page 98
Image 98
Kyocera KM-C1530 manual