JVC CU-V803, LYT0404-001A HOW to Connect, HOW to Attach, Specifications, Precautions for Handling

ENGLISH

PRECAUTIONS FOR HANDLING

●Keep lighting equipment away from the camera.

If you have lighting equipment near the camera, the heat emitted from the lighting equipment may cause deformation or failure to the camera.

●Dirt on the cabinet should be wiped out lightly with a soft cloth.

●Most surface of the cabinet is made of plastics. Wiping it with benzine and thinner may cause the painted film to deteriorate or come off.

●NEVER use pesticide near the camera.

Never use pesticide or other volatile components near the camera.

Or, never leave rubber or vinyl products in contact with the camera for a long time.

This may deteriorate the surface of the cabinet.

●Notes about the AC adapter:

Be sure to connect the provided AC adapter to the colour CCD camera via the provided cable units. Do NOT connect the AC adapter directly to the camera, otherwise, the voltage will be unstable and cause serious damage to the camera circuit due to excessive voltage.

●Notes about the CCD camera:

The camera is not water-resistant. Do NOT use the camera in places subject to rain, water or moisture. Do NOT push the lens strongly or apply any shocks. The picture colour tone may look different under fluorescent lights.

There may be some video noise under minimum illumination or due to a dark object’s shadow image. The picture may become temporarily distorted while the electronic iris adjusts itself in response to an abrupt change in the quantity of light.

●Notes about the cable units:

1.There may be some interference if you use more than one cable unit at the same time. Keep the cable units as far away from each other as possible while using them.

2.The picture may pick up some interference from external electromagnetic waves or other electrical wires through the provided wiring cable. Keep the wiring cable as short as possible for the connection and keep it away from the source of interference.

3.If the wiring cable is bundled during use, optimum results may not be obtained due to mutual interference from the cable. Do not leave extra length of the wiring cable bundled.

HOW TO CONNECT

			Wiring cable
			(the maximum transmission
		Cable terminals can	distance is 100 m; measured
			with a wiring cable equivalent
		be connected to
			to the provided one)
		either end of the
		wiring cable because		To AC outlet
	Cable unit A	they have no polarity.	Cable unit B	•Make all other
Colour CCD	(to the camera)		(to a TV)	connections
camera				before plugging
(with built-in				into an AC outlet.

condenser	VIDEO AUDIO	MIC		VIDEO AUDIO
microphone)	IN IN	IN	DC OUT	OUT OUT	DC IN
					AC
					adapter

To the video/audio input connectors

		TV
			Refer to the
• The audio input connector of cable unit A is not for use	Video/audio cable		instruction
with the colour CCD camera in the CU-V803 KIT.	(optional)		manual of
• You can connect an external appliance to the audio input			the TV/VCR
connector of cable unit A, however, the microphone input		VCR	being used
and the audio input cannot be used at the same time.

HOW TO ATTACH

•Notes about attachment:

If you attach the camera to a wall, do not leave the cables slack. Children may trip on the cables, which can cause the camera to fall, resulting in injury or damage.

Attaching the camera Attaching the cable units

	SPECIFICATIONS
Camera
Pickup	: 270,000-pixel 1/4" CCD
TV system	: PAL
Lens	: F2.0, f = 2.9 mm (fixed focus lens)
Minimum illumination : 4 lx
Microphone	: Built-in condenser microphone
Dimensions	(DC 3 — 5 V	)
	: 37 (W) x 50 (H) x 36 (D) mm
Weight	: Approx. 140 g
Cable Unit
Input voltage	: DC 12 V
Dimensions	: 100 (W) x 25 (H) x 70 (D) mm
Weight	: Approx. 90 g
AC Adapter
Input voltage	: AC 240 V` (CU-V803 KIT EK)
	AC 230 V` (CU-V803 KIT EG)
Output voltage	: DC 12 V
Dimensions	: 53 (W) x 82 (H) x 43 (D) mm
Weight	: Approx. 400 g

E. & O. E. Design and specifications subject to change without notice.