Copy Paper

3

To load paper into the manual bypass tray

Paper can be fed manually through the manual bypass tray if you wish to copy onto paper that is not loaded into a drawer or if you wish to copy onto special paper, such as overhead transparencies, postcards, or thick paper 1 or 2.

1Open the manual bypass tray.

2Adjust the paper guides to the size

of the paper, and then load the paper so that the front side of the paper (the side facing up when the package was unwrapped) faces down. Lightly slide the paper into the feed slot as much as possible so that it is ready to be fed into the copier.

?Do you need more information

on feeding paper through the manual bypass tray?

ÜFeed only one sheet of paper at a time.

ÜCopies will be made on the surface of the paper facing down when it is loaded into the manual bypass tray.

KM-C1530

3-17

Page 69
Image 69
Kyocera KM-C1530 To load paper into the manual bypass tray