Administrator Mode Operations
8
To register access codes
1In the Copy Track screen, touch [ON], and then touch [Access # Input].
The Access # Input screen appears.
2Touch [Account #], and then touch
and 
to select the desired account number.
m Registering a new access code with an account number already registered with an access code changes the access code to the new one.
m Although account numbers 1 through 99 are already
registered as a default, they can be changed. For more details, refer to “To change the account numbers registered” on page
m To specify a new account number, erase a previously registered account number.
3Using the keypad, enter the four- digit access code that you wish to register. To register other access codes, repeat steps 2 and 3 until the desired access codes are registered.
?Do you wish to change the access code of an account number?
ÜPress the [C] (clear) key to erase the entered access code.
?Has registration of the entered access code been cancelled?
ÜIf the entered access code is the same as one that has already been registered, registration is cancelled. Try again using a different access code.
|
