Before Making Copies
2
2.7Power Switch and Default Settings
Turning the copier on and off
To turn the copier on
Ü Set the power switch to “1”.
To turn the copier off
Ü Set the power switch to “2”.
.
Note
Do not turn off the copier while it is making copies, otherwise a paper misfeed may occur. Make sure that all copy operations are finished before turning off the copier.
When the copier is turned off, all settings except the stored zoom ratios and other stored settings in addition to the Utility mode settings are reset to their defaults.
.
Note
If the copier is not used for 15 minutes, it automatically enters Energy Saver mode. In addition, after the copier is not used for 30 minutes, it automatically turns itself off (Sleep mode).
The length of time until the copier enters Energy Saver mode or Sleep mode can be set using the “User’s Choice” function. For more details, refer to “Specifying Default Settings (“User’s Choice” Function)” on page
CAUTION
If the copier will not be used for a short period of time (overnight, etc.), turn the main switch OFF (O). If it will not be used for an ex- tended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the copier is not in use.
|
