Buffalo Technology Official TeraStation User Manual: How to Use NAS Navigator2 for Setup

2	Hold down the power button on the TeraStation for three seconds to turn it on.
3	Wait until the green power LED changes from flashing to lit. In the TS-RXL TeraStations, the LED is
	not illuminated. Continue to Step 4.
4	Insert the TeraNavigator software CD into your computer. The TeraNavigator wizard will launch.
	Click [Begin Installation].

Note:

If the wizard doesn’t open automatically, navigate to the TeraNavigator CD

and double-click the icon (TSNavi.exe).

Step through the wizard to connect cables and install software.

Notes:

5

6

•For Windows Vista, click [Run TSNavi.exe] when the auto-play screen is displayed. When “A program needs your permission to continue” is displayed, click [Continue].

•For Mac OS, open the CD and double click on the [TeraNavigator] icon.

•Disable your anti-virus software and firewall before continuing. You may not be able to install the software if anti-virus software or a software firewall are enabled. After you’ve finished setup, re-enable your firewall and antivirus software.

When the message [Completed] is displayed, click [Launch NAS Navigator2]. NAS Navigator2 will launch.

Note: Alternately, you can click [Next] to display more information about the Power Mode Switch, which can turn the TeraStation ON and OFF automatically.

Right-click on your TeraStation’s icon, and choose [Properties] - [IP Settings].

Note:

For Mac OS, hold the Control key, click on the TeraStation icon, then click [Configure] - [IP Address].

TeraStation User Manual 6