Buffalo Technology TSXE80TLR5, TS-RXL user manual Chapter Diagrams and Layout, TeraNavigator Setup

Chapter 1

Diagrams and Layout

TeraNavigator Setup

To configure your TeraStation, insert the TeraNavigator CD into a		Windows computer	on the	network and follow the
directions, or use the following procedure.
1 Connect cables		Fasten the plug with the clamp.*
TS-XL, TS-XEL
		1	2	3
Network	Power Connector
(Hub or Router)	LAN Port 1		* TS-XL TeraStations Only
Ethernet Cable
				Power Outlet
		AC Cable
TS-WXL/R1, TS-WXL/1D
		Fasten the plug with the clamp.
		1	2	3
Network	Power Connector
(Hub or Router)
	LAN Port 1
Ethernet Cable		AC Cable		Power Outlet
TS-RXL
		Fasten the plug with the clamp.
Network	LAN Port 1	1	2	3
(Hub or Router)
	Power Connector

Ethernet Cable

Power Outlet

AC Cable

Note:

Use LAN Port 1 for initial setup. After setup, you may connect a second cable to LAN Port 2. If used, configure the IP address of LAN Port 2 at [Network] - [Setting] - [IP Address Settings] in the Web Admin interface or NAS Navigator2.

TeraStation User Manual 5