Buffalo Technology TSXE80TLR5, TS-RXL user manual Using RAID 5 mode 4 hard drives

Using RAID 5 mode (4 hard drives)

1

2

Change system to normal mode (previous page).

Click [System] - [Storage] - [RAID Array] in the Web Admin interface.

3 Click the array you want to configure.

4

5

6

7

Select hard disks (all 4 of them) to use in RAID5.

1Select [RAID5].

2Click [Create Raid Array].

Note:

After the RAID array is changed, the TeraStation will perfom a RAID check that will take about 5 hours per TB. File transfers will be slower during this period. While the “RAID ARRAY x Resyncing” message is displayed on the LCD screen, do not turn off the TeraStation. If you turn it off, the RAID check will start over.

The [Confirm Operation] screen will appear.

Enter the number shown in the [Confirmation Number] field within 60 seconds, and click [Apply].

Follow the instructions displayed on the screen.

You have now set up a RAID 5 array. Turn to page 43 to create a shared folder.

TeraStation User Manual 21