Buffalo Technology TSXE80TLR5, TS-RXL user manual TeraStation User Manual

System - Power Management

	UPS Status	This is the feature to shutdown the TeraStation automatically when the UPS
		runs by battery due to power outage and such. If the UPS is connected, it shows
		the status of the UPS.
		* This setting must be done after connecting the UPS and the TeraStation with
		a USB cable.
	UPS Connection Type	Select a connection method with UPS.
		* [USB Port (APC Style)] or [USB Port (OMRON Style)] can be set only when you
		are using USB type UPS manufactured by APC.
		* The items to select will vary depending on a UPS model number and a cable.
		Refer to BUFFALO’s website (www.buffalotech.com) for details.
UPS Settings	Synchronize with UPS	Select [Enable] when using Synchronization with UPS feature.
Click [Modify Settings]		* [USB Port (APC Style)] or [USB Port (OMRON Style)] can be set only when you
to change settings.		are using USB type UPS manufactured by APC.
	TeraStation behavior	Allows you to set the time until shutdown when the power failure continues.
	When Power failure	Or, you can set to [Shutdown TeraStation when UPS Reports ‘Battery Low’
		status.].
		* Shutting down by Battery Low can be used only when UPS for USB
		connection is used.
	UPS Behavior After	Specifies whether shutting down UPS or not after shutting down the
	TeraStation has shut	TeraStation.
	down
	UPS Recovery	Reboot the TeraStation Automatically after recovering supply from AC power
	function	to UPS.
	Timer Interval	Select [Timer Interval] from [Disable], [Everyday], or [Specific day	of the week]
		for Sleep Timer.
		If selecting [Specific day of the week], specify the day by tick the	box for that
SleepTimer		day.
		Timer can be set up to 3 (1-3).
Click [Modify Settings]
	Wake up at	Specify the restart time which recover from the Standby to the Normal state.
to change settings.
		You can set time from 0:00 to 23:45.
	Begin Sleep at	Specify the ending time to move from Normal state to Standby State.
		You can set time from 0:00 to 27:45.
		* You can not set the ending time before or the same time as a beginning time.

TeraStation User Manual 135