Buffalo Technology TSXE80TLR5, TS-RXL user manual Backup Notes

4

5

6

1Select [Backup Sources] and [Backup Targets] folders.

2Click [Add].

Click [Apply].

The backup job is added to the list of backup jobs.

Backup Notes:

•You can register up to the second level of subfolders. However, folders with more than 80 bytes(UTF-8) in their names cannot be selected.

•Before they can be selected as backup target folders, folders on other TeraStations must be configured as backup destinations.

•To use a folder on an external hard drive as a backup target, you should format it with XFS, FAT or EXT3.

•If you are using PC Power Management, your system will automatically boot 15 minutes before the backup job begins.

•If your PC enters sleep mode just before a scheduled backup, the backup job may not have time to reboot the system before the backup job begins. If this happens, the backup job may fail.

• Source and target TeraStations should be configured with similar Jumbo Frame settings. If you are experiencing problems backing up one TeraStation to another, try setting the frame size for both to the default (1518 bytes).

•If you change formatting or RAID array settings, previously created backup jobs may no longer run correctly. Delete the old backup jobs and create new backup jobs for the new share(s).

•Backups on EXT3 formatted USB disks can be read from a Windows PC with the provided Buffalo EXT3 reader software.

TeraStation User Manual 35