Buffalo Technology TSXE80TLR5, TS-RXL user manual Status, TeraStation User Manual

Status

Displays the current status when changing the settings or formatting drives.

Examples of LCD		Meaning
HDx Warning	I11	Bad sectors in Xth hard drive may reach the dangerous zone. Replace Xth hard drive.
Bad Sectors
Operation Mode	I12	RAID Degrade mode is running.
DEGRADE MODE
RAID	I13	Formatting Xth RAID Array.
ARRAYx Formatting
RAID	I14	Checking Xth RAID Array.
ARRAYx Checking
RAID	I15	Investigating the error status occurred in Xth RAID array.
ARRAYx Scanning		* During the investigation, transfer speed will be degraded.
RAID	I16	Creating Xth RAID Array.
ARRAYx Creating
RAID	I17	Resyncing Xth RAID Array.
ARRAYx Resyncing		* While resyncing, the transfer speed will be degraded.
RAID	I18	Rebuilding Xth RAID Array.
ARRAYx Rebuilding		* While rebuilding, the transfer speed will be degraded.
RAID	I19	Deleting data completely by filling 0 into Xth RAID array.
ARRAYx 0 Filling
DISK	I20	Formatting Xth hard drive.
DISKx Formatting
DISK	I21	Checking Xth hard disk.
DISKx Checking
DISK	I22	Deleting data in Xth hard drive.
DISKx 0 Filling
SYSTEM	I23	Initializing the system.
Initializing
Network	I24	Setting the network such as obtaining an IP address.
Setting Config
SYSTEM	I25	Updating the TeraStation’s firmware.
F/WUPDATING		* Do not turn off the TeraStation while updating.
Web Setting	I26	Initializing web configuration.
Initializing
USB Diskx	I27	Checking Xth USB hard disk.
Checking
USB Diskx	I28	Formatting Xth USB hard drive.
Formatting
Press FuncSW	I31	This message is displayed when restructure RAID by pressing a function switch after
New Diskx ready		replacing the hard drive.
Set From Web	I32	This is displayed when RAID needs to be restructured on the Web Admin interface or
New Diskx ready		formatted after replacing the hard drive.

*If you are using TS-RXL Series, LCD display with the height of 1 line contains 2 line’s worth of information. You can scroll horizontally to view it.

TeraStation User Manual 147