Buffalo Technology TS-RXL, TSXE80TLR5 user manual 126

	Remove Disk	To remove a hard disk, select the disk you want to disconnect and click [Remove Disk]
Disks	Rediscover Disk	After performing the procedure to remove the hard drive, taking it off physically, and
		replacing to another hard drive, click here to have the TeraStation recognize a drive again
		without restarting the unit.
	RAID Array	This is displayed when clicking the name on the RAID array Screen.
		If you have not set RAID, you can select from [RAID5], [RAID1], [RAID10], and [RAID0] for TS-
		XL and TS-XEL series TeraStations, [RAID1] and [RAID0] for TS-WXL series TeraStations. If you
		do not select from any of the above, the unit is used as a normal mode (4 hard drives).
		[Disk Structure]:
		Displays the hard drives that consist of RAID. To configure RAID, check the hard drives you
		are going to use, select RAID mode, and click [Create Raid Array].
		• To configure (build) RAID1, click 2 drives you are going to use and insert check marks.
		• To configure (build) RAID10 and RAID0, click all drives and insert check marks.
RAID Array		* TS-WXL series TeraStations cannot be set to RAID10.
		• To configure (build) RAID5, click all drives or 3 drives you are going to use and insert check
		marks.
		* TS-WXL series TeraStations cannot be set to RAID5
		• When delete RAID composition, click [Delete RAID Array].
		* Changing or deleting RAID settings will erase all data in the hard drive. Back up your
		important data before performing any operations described above.
		* If you have a hard drive in the normal mode while building RAID5 (3 hard drives) or RAID1,
		it can be set as a spare by clicking [ Set to spare-disk]. If it has already set to a spare drive,
		click [Set to normal disk] to set it to the hard drive in the normal mode.
		* [ Set to spare-disk] will not be displayed on TS-WXL series TeraStations.

TeraStation User Manual 126