Buffalo Technology TS-RXL, TSXE80TLR5 user manual UPS Settings

UPS Settings

An UPS (Uninterruptible Power Supply) can protect the TeraStation from power outages and brownouts. To use the TeraStation with a UPS, proceed as follows:

1 Plug the power cable of the UPS to a wall socket.

2 Connect the AC cable of the TeraStation to the UPS.

3 Connect the UPS to the TeraStation with a USB or serial connection.

Note:

• TS-XEL series TeraStations do not have UPS Port.

4

5

6

7

Turn on the UPS, then the TeraStation.

In the Web Admin interface, click [System] - [Power Management] - [UPS Settings].

Click [Modify Settings].

1Check [Enable].

2Configure the desired settings.

3Click [Save].

Notes:

•If the UPS has shut down the TeraStation because of a power outage, make sure that power has been restored before restarting the TeraStation. If the TeraStation is restarted after a shutdown, but power is not available, then the UPS will not shut down the TeraStation a second time even if its battery is running low.

•If the TeraStation is set to use UPS recovery, then the UPS will restart the TeraStation when normal power is restored.

TeraStation User Manual 66