Buffalo Technology TSXE80TLR5, TS-RXL user manual 133, CRAM-MD5SMTP-AUTH/CRAM-MD5, Ssl/Tls

System - Maintenance

	Notification	Select whether using Email notification feature or not.
	SMTP Server Address	Enter [SMTP Server Address] (Mail Server Address).
	SMTP Port No.	Enter [SMTP Port No.].
		* The standard port number (25) is used if not specified. Also, User
		authentication method is set to [Disable] or [POP before SMTP], the standard
		port number (25) is used regardless of the number you entered in this field.
	Authentication Type	Select [Authentication Type] from [POP before SMTP], [LOGIN(SMTP-AUTH)], and
		[CRAM-MD5(SMTP-AUTH/CRAM-MD5)].
	POP3 Server Address	Enter [POP3 Server Address] (Email server address).
	POP3 Port No.	Enter [POP3 Port No.].
		* The standard port number (110) is used if not specified.
	SSL/TLS	When [LOGIN(SMTP-AUTH)] and [CRAM-MD5(SMTP-AUTH/CRAM-MD5)] are
Email Notification		selected for [Authentication Type], specify either using [SSL] or [TLS].
	Username	Enter a user name that will be used for authentication.
Click [Modify Settings]
	Password	Enter a password that will be used to verify.
to change settings.
Click [Send Test	Subject	Specify the subject of the email to be sent.
Message] to send a		* Do not use multi-byte characters. It may cause the character corruption.
test email to the email
	Recipient(s)	Enter the email address of the receiver, and click [Add].
address which has
		* You can register up to 5 email addresses as receivers.
been set.
	Report	Select the contents to send in the email notification.
		• [HDD Status Report]
		Sends the condition of the hard drives at the specified time on [HDD Status
		Report].
		• [System Alert]
		Sends when system is rebooted or shut down, or RAID configuration is
		changed.
		• [Disk Error]
		Sends when an hard drive error is recognized.
		• [Fan Failure]
		Sends when the fan error is recognized.
		• [Backup Complete]
		Sends when the backup is complete.
		• [Quota Report]
		Sends when the Quota Space Limitation is exceeded at the time which is
		specified on HDD Status Report.
	Syslog	Select [Enabled] for [Syslog Transfer] and select [Save] to transmit the system
		log.
		To view a log, select [System Log], [File Log (SMB)], [FTP Log] for [Logs To
		Transfer]. You can transmit the log by entering the IP address of the syslog server
		in [Syslog Server IP Address] field when you select [System Log], [File Log (SMB)].
Syslog		*[FTP Log] does not support to output a log to the syslog server.
Click [Modify Settings]		[Store Files Locally]
to change settings.		To store logs on the TeraStation, select [Enable] for [Store Files Locally]. Select
		one of the TeraStation’s shared folders as the [Target Folder]. A subfolder
		called “system_log” will be created in that folder, and logs will be saved to that
		subfolder.
		* If you select [File Log (SMB)] or [FTP Log], only file operations from internal hard
		drives will be logged. File operations from USB drives will not be logged.

TeraStation User Manual 133