Buffalo Technology TS-RXL, TSXE80TLR5 user manual Opening the Web Admin interface

Opening the Web Admin interface

To configure your TeraStation, use the Web Admin interface from a browser on a computer connected to the same network.

1 Launch NAS Navigator2. For Windows, click on the [BUFFALO NAS Navigator2] icon on your desktop. For Mac OS X, double-click on the [NAS Navigator2] icon in the Dock.

2

3

Right-click on the TeraStation icon (on Mac OS X, click the icon while holding down the control key) and select [Open Web setting] from the menu.

Notes:

•If multiple TeraStations and TeraStations are connected to the network, multiple icons will be displayed. Click on the correct TeraStation.

•Record the TeraStation’s IP address from the bottom right of the NAS Navigator2 window.

1Enter your username and password, and click [Login]. Initially, use the default username and password: Username: admin

Password: password

2After you log in, change the password for security.

Note:

•To login as a guest, type “guest” for the Username, leave the password blank, and click [OK]. Guests can check the

TeraStation’s name, IP address, workgroup, and disk status. Regular users can change their login passwords as well as check the TeraStation name, IP Address, workgroup, and disk status. Administrator user, “admin” by default, can configure all options.

This is the Web Admin interface. This page displays the

4TeraStation’s current status, including name, IP address, workgroup, and hard disk settings.

Notes:

•The Web Admin interface supports Firefox 1.5 or later, Internet Explorer 6.0 with SP2 or later, and Safari 3 or later. It may not display properly in other browsers.

•The Web Admin interface may not display correctly in Internet Explorer due to your browser security settings. If this happens, navigate to [Tools] - [Internet Options] - [Security] on Internet Explorer, and set the Security Settings to [Local intranet].

TeraStation User Manual 16