Buffalo Technology TS-RXL Network, Replication is configured, Backup. Click on View NAS Devices

Configure replication as described below.

1

2 Click [Add].

3

In the source TeraStation’s Web Admin interface, click [System] - [Backup] - [Replication].

1Select replication source folder for [Backup Source].

2Select replication target folder for [Backup Targets].

3Click [Save].

4 Read the alert message carefully and click [OK].
Replication is configured.
Replication to a TeraStation on a different	network
If your target TeraStation is on a different network or subnet, you		may still configure replication as described above, but
you must first add the target TeraStation to your list of	off-subnet	TeraStations as described below.

1	In the source TeraStation’s Web Admin interface, navigate to [System] -
	[Backup]. Click on [View NAS Devices].

2

3 Click [Close].

Under [Off Subnet TeraStations], enter the target TeraStation’s IP address in the [New IP Address] field. Click [Add].

Note: If the Target TeraStation is behind a router, enter the router’s WAN side IP address. You will need to map ports 873, 22938, 22939 to the target TeraStation in the router for this to work correctly.

You can now configure Replication as described in the previous section.

TeraStation User Manual 38