Buffalo Technology TS-RXL, TSXE80TLR5 user manual

6

7

1Select [Enable].

2Select the shared folder that you set in step 3.

3Click [Save].

1Enter the Mac’s host name for [Target host name].

2Enter the Mac’s Ethernet MAC address for [Target MAC address].

3Click [Create].

Notes: • A Macintosh computer’s host name can be found under [Computer Name] in [System Preferences] - [Sharing].

Examples:

If Computers on your local network can access your computer at “bbbbbbbbbb.local”, enter ’bbbbbbbbbb” for the host name. If it is “cccccccccc.eee-ee.local”, enter “cccccccccc” for the host name. If it is “dddddddddd.fff-ff.jp”, enter “dddddddddd” for the host name.

• A Macintosh computer’s Ethernet MAC address is available from its network page.

1From the Apple menu, select [About This Mac], then [More Info].

2 System Profiler will open. Click [Network] on the left side.

3The Ethernet MAC address will have a BSD Device Name of “en0”. It will be labeled “IPv4 Addresses”. Copy the address and paste it

into [Target MAC address].

Note:

The folder <Macintosh Host Name>_<Macintosh MAC address>.sparsebundle will be created in the shared folder that was selected as the target share for Time Machine in step 3. Do not delete this folder or change its name, or Time Machine will not work properly.

8 From the Apple menu, select [System Preferences].

TeraStation User Manual 40