Using RAID 10 mode

1

2

Change system to normal mode (page 20).

Click [System] - [Storage] - [RAID Array] in the Web Admin interface.

3

Click the array you want to configure.

 

4

Select hard drives (all 4 of them) to use in RAID10.

 

5

1 Select [RAID 10].

 

 

2 Click [Create Raid Array].

Note:

After the RAID array is changed, the TeraStation will perfom a RAID check that will take about 5 hours per TB. File transfers will be slower during this period. While the “RAID ARRAY x Resyncing” message is displayed on the LCD screen, do not turn off the TeraStation. If you turn it off, the RAID check will start over.

6 The [Confirm Operation] screen will appear.

Enter the number shown in the [Confirmation Number] field within 60 seconds, and click [Apply].

7 Follow the instructions displayed on the screen.

You have now set up a RAID 10 array. Turn to page 43 to create a shared folder.

TeraStation User Manual

23

Page 24
Image 24
Buffalo Technology TSXE80TLR5, TS-RXL Using RAID 10 mode, Select RAID, Select hard drives all 4 of them to use in RAID10