Typical Uses of PhaserMatch Software
Installing on Windows Systems
1.Insert the PhaserMatch or PhaserCal
2.Read the license agreement and click Accept to continue.
Note: To install additional profiles, select Custom, and then select the profiles that you want to install.
3.Follow the prompts in the installer to finish the installation.
Next Recommended Reading
■For an introduction to using PhaserMatch or PhaserCal to calibrate your Phaser 7760, 7750, or 7700 printer, go to Calibrating a Printer on page
■For an introduction to creating a custom TekColor correction, go to Creating Custom TekColor Corrections on page
■For an introduction to printing using custom TekColor corrections, go to Printing with Custom TekColor Corrections on page
Typical Uses of PhaserMatch Software
Calibrating a Printer
Color calibration is one of the most important things you can do if you want to obtain optimal color output from your printer. Color laser printers must be periodically calibrated to eliminate changes in printed colors caused by environmental conditions, such as temperature and humidity, and normal wear on printer consumables, such as toner cartridges and imaging units. Calibration may also be necessary if the printer has been used for long extended print runs or after extended periods of inactivity.
Calibration can be done using one of the following two methods.
■Method 1 is a
This is the recommended method for calibration as it provides the most consistent calibration method for your printer. If you do not have a spectrophotometer, it is suggested that you consider purchasing one because a spectrophotometer can be a valuable color tool for your business.
■Method 2 is a visual calibration done using the control panel of the printer.
Calibration should be performed after the printer is warmed up.
For more information on color calibration, see Printer Calibration on page
PhaserMatch and PhaserCal 4.0 User Guide
