Copy Paper

3

To load paper into the large-capacity cabinet

1Pull out the paper drawer.

2Load paper into the right side of the

drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up.

? Has the paper been loaded correctly?

If the paper is not loaded correctly, a paper misfeed may occur.

ÜMake sure that the paper is not curled when it is loaded.

ÜDo not load so much paper that the top of the stack is higher than the Ämark.

ÜSpecial paper cannot be fed from the 2nd drawer or optional paper feed units. If you wish to make copies onto special paper, feed it through the manual bypass tray or the 1st drawer.

ÜWhen loading additional paper, remove any paper remaining in the drawer, place it on the new paper, and then align the paper in the stack well before loading it into the drawer.

ÜWe recommend replenishing the paper only after all of the paper in the drawer has been used.

KM-C1530

3-15

Page 67
Image 67
Kyocera KM-C1530 To load paper into the large-capacity cabinet, Pull out the paper drawer Load paper into the right side