
8
Administrator Mode Operations
mFold the printed page in half, and then check that the test
patterns are aligned. Check that |
| |
the widths of both margins are |
| |
the same. |
|
|
m If the margin widths of the test |
| |
patterns are not the same, touch |
| |
and | to adjust it, and |
|
then touch [Enter]. |
| |
Setting a higher positive number |
| |
makes the margin wider; setting |
| |
a higher negative number |
| |
makes the margin narrower. |
| |
m Repeat step 3 until the widths of | c |
both margins are the same.
?What is the standard setting?
ÜBefore adjusting the third or fourth paper drawer, enter the same adjustment value for the first or second paper drawer and
check the test pattern. | c: 3.0 mm ± 1.0 mm |
4In the Expert User’s Mode screen, touch [Exit].
5In the Administrator Mode screen, touch [Exit].
6In the Utility screen, touch [Exit].
|