
In the Utility screen, touch [Exit].
In the Administrator Mode screen, touch [Exit].
In the Expert User’s Mode screen, touch [Exit].
3
4
5
6 Copy a document, and then compare the copy to the original document. Check that the copy is correct.
Administrator Mode Operations
To set the “Stabilizer” parameter
If the image is incorrect, even after the gradation levels have been adjusted, set the “Stabilizer” parameter. The default setting is “Stabilizer Mode”. The Stabilizer mode performs an image stabilization of the previous data (background) to its original state.
1 In the Expert User’s Mode screen, touch [Stabilizer].
The Stabilizer screen appears.
2 Select the desired mode, and then press the [Start] key to adjust the stabilizer automatically.
After the stabilizer is correctly adjusted, the Expert User’s Mode screen appears.
m First select “Stabilizer Mode”. If the image is not corrected, select “Reset And Stabilizer Mode”.
8