7
Utility Mode Operations
To set the “1st Drawer Paper Select” parameter
Use this parameter to specify the size of paper loaded into the 1st drawer. The default setting is “Auto Detect”.
1In the User’s Choice screen, touch [1st Drawer Paper Select].
2Select how the size of paper loaded into the 1st drawer is detected.
?Is the loaded paper a metric or non-standard size?
ÜTouch [Input Size], and then specify the desired paper size. Refer to “Paper Specifications” on page
3To select the paper size manually, touch [Input Size], select the desired paper size, and then touch [Enter].
4To specify a paper size other than those listed, touch [Custom Size],
touch 
, 
, 
, and 
to specify the desired size, and then touch [Enter].
|
