3
Copy Paper
mFor
the
4Load the paper into the drawer so
that the front side of the paper (the side facing up when the package was unwrapped) faces up.
? Has the paper been loaded correctly?
If the paper is not loaded correctly, a paper misfeed may occur.
ÜDo not load so much paper that the top of the stack is higher than the Ä mark.
ÜDo not load more than 20 sheets of thick paper 1, overhead projector transparencies, or postcards.
ÜDo not load thick paper 2 into the 1st drawer. If you wish to make copies onto thick paper 2, feed it through the manual bypass tray.
ÜWhen loading additional paper, remove any paper remaining in the drawer, place it on the new paper, and then align the paper in the stack well before loading it into the drawer.
ÜWe recommend replenishing the paper only after all of the paper in the drawer has been used.
|
