Utility Mode Operations

7

To set the “Auto Panel Reset” parameter

This parameter can be used to turn off (“OFF”) the panel reset, or to specify the length of time (between 1 and 9 minutes) after the last operation until the touch panel automatically returns to its default settings. The default setting is “1 min.”

1In the User’s Choice screen, touch [Auto Panel Reset].

2Using the keypad, enter the desired number of minutes, and then touch [Enter].

?Do you wish to change the number of minutes entered?

ÜPress the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes.

3In the User’s Choice screen, touch [Exit].

KM-C1530

7-15

Page 165
Image 165
Kyocera KM-C1530 manual To set the Auto Panel Reset parameter