Kyocera KM-C1530 manual To select the finishing settings

Advanced Operations

6

Setting	Options Installed	Operation
Group	10-Mailbin Sorter (AS-	For a copy job, the output is fed into mailbin
	M4110)	1.
		The number of mailbins that can be used to
		receive the output can be set between a
		maximum of 10 and a minimum of 2,
		according to the “Mail Bin Assignment”
		parameter setting. For more details, refer to
		the section “To set the “Mail Bin
		Assignment” parameter” on page 7-14.

*A print job is a print command sent from a computer to the optional printer controller, then printed by this machine.

To select the finishing settings

1Position the document(s) to be copied. (Refer to page 4-1 for more details.)

2Select the desired color mode. (Refer to page 2-20 for more details.)

3Touch [Finishing].

4Select the desired finishing settings. The screen shown at the right appears when the 10-mailbin sorter (AS-M4110) is installed. If the finisher is installed, [Sort] and [Group] do not appear.

5Specify any other necessary settings.

6Using the keypad, enter the number of copies you wish to make, and then press the [Start] key.

KM-C1530 6-11