Philips SA4126, SA4146, SA4127, SA4147 manual Install, Connect, Insert the battery

3.2 Install

Important Make sure to install the software provided in the supplied CD for music transfer.

System requirements:

•Windows XP (SP2 or higher)

•Pentium Class 300MHz processor or higher

•128MB RAM

•500MB hard disk space

•Internet connection (preferable)

•Microsoft Internet Explorer 6.0 or later

•USB port

1Insert the CD supplied with your product into the CD ROM drive of your PC.

2Follow the on-screen instructions to complete the installation of Windows Media Player and Philips Device Manager.

3If the installation program does not start automatically, browse the CD contents with Windows Explorer and run the program by double clicking on the file ending with .exe.

Lost your CD? Don’t worry, you can download the CD contents from www.philips.com/support.

3.3 Connect

3.3.1 Insert the battery

1Remove the battery door by sliding it in the direction of arrow.

2Insert the supplied AAA battery into the battery compartment.

3.3.2 Read the battery level indication of your player

The approximate power levels of your battery are indicated as follows:

Full Two-thirds full Half full Low Empty

Note When the batteries are almost empty, the low battery screen blinks. Your player will power down in less than 60 seconds. Your player will save all settings and un- finished recordings before it powers down.

12