Installation Instructions

1INSTALL THE COOKTOP

A.Remove the screws on the sides of the cooktop burner box. Use those screws to attach the side mounting brackets.

B.Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop.

Check clearances at the front, back and sides.

Cooktop

Secure the hold-down bracket to the cabinet sides with screws.

2 INSTALL PRESSURE REGULATOR

WARNING: Never reuse old flexible connectors. The use of old flexible connectors can cause gas leaks and personal injury. Always use new flexible connectors when installing a gas appliance.

To reduce the possibility of gas leaks, apply teflon tape or a thread compound approved for use with LP or Natural gases to all threaded connections.

A.Screw the regulator onto the burner box bottom pipe connection. Make sure the top of the regulator is facing toward the cabinet front, and the arrow on the back of the regulator points to the cooktop.

 

To cooktop

 

Rear view

Pressure

of

regulator

regulator

(note

 

 

direction

 

of arrow)

 

Electrical outlet 12

Shut-off

below countertop

 

valve

 

2INSTALL PRESSURE REGULATOR (cont.)

Burner Box

90º Elbow

OPTION: You can install a 90º elbow (not supplied) onto the gas inlet and route the gas connections to avoid interference when installed over an oven, with a downdraft vent, a warming drawer or other cabinetry features.

B. Complete the connection between the regulator and the shut-off valve.

C. Before testing for leaks, make sure all burner knobs are in the OFF position.

After connecting the cooktop to gas, check

system for leaks with a manometer. If a manometer is not available, turn the gas supply on to the cooktop and use a liquid leak detector at all

joints and connections to check for leaks.

Tighten all connections if necessary to prevent gas leakage in the cooktop or supply line.

WARNING:Do not use a flame to check for leaks.

Disconnect the cooktop and its individual shut-off valve from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psig (3.5 kPa).

Isolate the cooktop from the gas supply piping system by closing its individual shut-off valve during any pressure testing of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa).

3CONNECT ELECTRICAL

Check to be sure the receptacle is properly grounded.

Plug in the power cord.

9

Page 9
Image 9
GE Monogram ZGU385L Installation Instructions, Install the Cooktop, Install Pressure Regulator, Connect Electrical

ZGU385L, ZGU385N specifications

The GE Monogram ZGU385N and ZGU385L are standout models in the high-end cooking appliance market, designed to elevate culinary experiences with their advanced features and sophisticated design. Both of these gas cooktops are known for their powerful performance and user-friendly technologies, making them ideal for both amateur cooks and professional chefs.

One of the primary highlights of the ZGU385N and ZGU385L is their robust heating capabilities. Equipped with dual-flame burners, these models can deliver precise heat control, allowing users to achieve the perfect simmer or rapid boil. The increased output of up to 18,000 BTUs on select burners ensures that water boils quickly and cooking times are significantly reduced. Additionally, the inclusion of a simmer burner provides the gentle heat needed for delicate sauces and risottos.

In terms of design, both models boast a sleek stainless steel finish that complements any kitchen decor. The continuous cast-iron grates provide both style and functionality, enabling pots and pans to glide effortlessly across the surface. The professional-grade knobs are ergonomically designed and offer a tactile experience, making temperature adjustments smooth and intuitive.

Cleaning these cooktops is a breeze, thanks to their sealed burners and heavy-duty grates that can be easily removed. The surface itself is designed to resist scratches and stains, ensuring that the appliance maintains its elegance even with regular use.

Moreover, the ZGU385N and ZGU385L are equipped with advanced safety features. The automatic re-ignition system ensures that if a flame accidentally goes out, the burner will reignite automatically, providing peace of mind during cooking. The cooktops are also compatible with various kitchen ventilation solutions, ensuring that smoke and odors are efficiently removed.

Another notable aspect is the flexibility of burner configurations. The cooktops come with multiple burner sizes tailored for different cooking tasks, from large pots to smaller pans. This versatility allows users to maximize their cooking potential without compromising on space.

In conclusion, the GE Monogram ZGU385N and ZGU385L are exceptional gas cooktops that seamlessly blend performance, design, and safety. Their advanced technology, powerful burners, and user-friendly features make them an excellent choice for anyone wanting to enhance their kitchen. Whether it's a simple weeknight dinner or a complex gourmet meal, these cooktops are built to deliver consistent, impressive results every time.