Sharp LC-60LE640X operation manual Basic adjustment, Advanced

Basic adjustment

Picture

Advanced

This TV provides various advanced functions for optimising the picture quality.

Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour using a six-colour adjustment system.

NOTE

•This effect is greater on fast moving images.

•This function will have no effect in the following cases.

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

•If images appear blurred, set to “Off”.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e2 to a minimum of f2.

C.M.S.-saturation

This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.

C.M.S.-value

This function adjusts the brightness of a selected colour using a six-colour adjustment system.

Colour temp.

Adjusts the colour temperature to give the best white image.

	Item
High	White with bluish tone.
Mid-High	Intermediate tone between “High” and
	“Middle”.
Middle	Natural tone.
Mid-Low	Intermediate tone between “Middle” and
	“Low”.
Low	White with reddish tone.
10 point setting*	Finely adjusts each colour temperature
	between 1 to 10 points.
R/G/B Gain (LO),	Adjusts the white balance by changing the
R/G/B Gain (HI)	value of each item.

*“10 point setting” is available only when selecting “STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)” from the “AV mode” menu.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality.

	Item
Advanced	Adjust effect to reduce judder from film
	contents. Select a desired level of judder
	reduction from 0 to +10.
Standard	Detects, analyses, converts film source.
Off	Normal viewing mode.

NOTE

•Film mode is not selectable depending on the input signal type.

Active contrast

Automatically adjusts the contrast of an image according to the scene.

DNR (Digital Noise Reduction)

“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).

NOTE

•This function may not be available depending on the input signal type.

AQUOMOTION

“AQUOMOTION” technologies provide superior solutions for digital display picture quality removing motion blur (“AquoMotion 200/240”, “High”, “Low”, “Off”).

36