Sharp LC-60LE640X Useful viewing functions, Sort, Erase programme, TV Start-up time setting

Basic adjustment Useful viewing functions

Label

When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually.

Select each character of the new name for the channel with using the software keyboard (see page 15).

NOTE

•The name can be five characters or less. Select “Cancel” to set the channel name.

Skip

Channels with “Skip” set to “On” are passed over when using CHr/seven if selected while watching the image from the TV.

Lock

You can block the viewing of any channel.

NOTE

•See page 43 for setting a password.

•When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.

•When pressing Cwhile “Child lock has been activated” displays, the password input window will display. Inputting the correct password unlocks the “Password” temporarily until the power is turned off.

Sort

Channel positions can be sorted freely.

1Press c/dto select “Yes”, and then press ?.

2Press a/b/c/dto select the channel you want to move, and then press ?.

3Press a/b/c/dto move it to the desired position, and then press ?.

4Repeat steps 2 and 3 until all desired channels are sorted.

Erase programme

Channels can be erased individually.

1Press c/dto select “Yes”, and then press ?.

2Press a/b/c/dto select the channel you want to erase, and then press ?.

• A message window pops up.

3Press c/dto select “Yes”, and then press ? to erase the selected channel. All the subsequent channels move up.

4Repeat steps 2 and 3 until all desired channels are erased.

TV Start-up time setting

View setting

Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”.

	Item
On	The TV quickly starts up from standby.
	36W or more of power consumption is
	required during standby.
	The “Quick start” mode will automatically
	turn on and off depending on the time
Auto (Time shift)	shift status. If playable data exists on the
	USB storage device registered for time
	shift, “Quick start” will be automatically
	set to the same status as “On”.
Off	Power consumption is small during
	standby.

NOTE

•You cannot select “Off” in the “Quick start” menu while time shift is activated. Follow the on-screen instructions to change the “Quick start” settings.

•If you want to clear the playable data, go to “HOME” >

“TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Clear the Time shift memory” (Page 59).

42