Other useful features
Disconnecting the USB device
When you disconnect the USB device, be sure to the following steps.
For time shift
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Device removal”.
NOTE
•This menu item cannot be selected when a USB storage device for time shift is not registered.
•The USB storage device registration for time shift is cancelled in the following cases:
−When the USB storage device is removed.
−When another USB storage device is registered for time shift; only one USB device can be registered for time shift.
For USB media
Press B on the remote control unit while the “Photo”, “Music”, “Video” folder or a
Time shift + (DTV only)
This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene.
CAUTION
•Do not unplug the AC cord or turn off the MAIN POWER switch during time shift timer setting or time shift recording.
•When the AC cord is unplugged and the MAIN POWER switch is turned off:
−The time shift timer setting is cancelled.
−Recorded data is deleted.
•Time shift recording may be automatically stopped when signal reception is poor.
•Only this TV can playback the programme recorded on the USB storage device connected to this TV. The programmes cannot playback on other TV or PC.
SHARP corporation bears no responsibility regarding compensation for content when recording cannot does not take place, loss of recorded data or other direct or indirect damages related to these matters. Please be forewarned.
EButtons for time shift operation
Remote control unit | Control panel |
EXT MEDIA |
|
TV INFO
SLEEP
Buttons | Description | |
| Start recording the programme you are | |
| watching. | |
REC E | • You cannot playback the recorded | |
programme until approximately three | ||
| ||
| seconds after pressing REC Eto start | |
| recording. | |
|
| |
REC STOP H | Stop recording. |
IPlayback the recorded programme.
HStop the programme in playback and go back to the real time broadcast (live).
Pause the programme in playback (time
Fshift recording continues).
• This function is released in 15 minutes.
SReverse (each time you press this button, the reverse speed changes in three levels).
Fast forward (each time you press this
Jbutton, the fast forward speed changes in three levels).
KJump backward to the previous chapter point*.
LJump forward to the next chapter point*.
Playback will resume after jumping
abackward by the time interval you set in “Jump time setting” (Page 59).
Playback will resume after jumping forward
bby the time interval you set in “Jump time setting” (Page 59).
* Chapter points are fixed at 10 minute increments.
NOTE
•Refer to Regarding “Select recording device” (Page 31)
•Instead of pressing buttons on the remote control unit, most of the operations shown to the left are also available on the screen with the control panel. You can call up this control panel by pressing CONTROL on the remote control unit or select “Control (Time shift)” from “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view”.
•The “Audio description setting” menu does not work during time shift playback.
•When the amount of memory used for time shift reaches
“Full” and the blue point is around the left edge of the bar (see and in the Counter section on page 59), you cannot operate some functions (F(Pause), S(Reverse), K(Jumping backward to the previous chapter point), a (Jumping backward by the time interval you set in “Jump time setting”)).
•Time shift recording stops if no operation detected for three hours.
•When recording operations are not stopped manually, recording will automatically stop after six hours.
•To release time shift, press REC STOP H, change the DTV/ SAT channel or change “INPUT”.
•Some functions do not work during time shift.
•As time shift is not actually a recording function, recorded data will be reset when the MAIN POWER switch is turned off or when the AC cord is unplugged.
•Time shift does not start automatically, but starts only when REC Eis pressed or when a time shift timer setting is started.
•The PIN is required when you use the buttons such as S, J, K, L, a, b, if you set the PIN and any options for “Parental rating” except “None” are selected.
•Do not disconnect the USB storage device used for time shift during time shift operation.
57
