Basic adjustment
Channel settings
Go to “HOME” > “TV Menu” > “Setup” > “View setting”.
Menu
| CH list | Setup |
: Select | :Enter | :Back |
View setting
Auto installation
Channel settings
Network setup
Select recording device
[USB storage]
View setting
Auto installation
The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting and reconfigure the settings after the initial auto installation has been completed.
1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Auto installation”.
View setting
Programme setup
You can run the auto search procedure again at any time by accessing the “Setup” menu and “Programme setup”. Channels can be tuned automatically or manually.
Digital setting (DTV only)
You can reconfigure the DTV channel settings automatically or manually.
1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.
2If you have already set the password, enter it here.
• See page 43 for setting a password.
3The “Digital setting” screen displays, and then press ?.
4Press a/bto select the desired menu item, and then press ?.
5Press c/dto select “Yes”, and then press ?.
Additional search
Use this menu to add new services automatically after “Auto installation” has been completed.
•Start searching channels after selecting the colour system and sound system.
Manual search
2If you have already set the password, enter it here.
• See page 43 for setting a password.
Add new services within a specified frequency band.
• Enter the frequency using
3Press c/dto select “Yes”, and then press ?.
4 Press a/b/c/dto select the desired language, and then press ?.
•You do not need to do anything during the auto search.
5 Press c/dto select “Digital Search” or “Analogue Search”, and then press ?.
•When the country setting is set to “Australia”, only “Digital Search” is available.
NOTE
•You cannot set the HOME/STORE setting and the country setting in “Auto installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.
•The current country setting is displayed on the screen.
•In the setting of some country, selecting of “Digital Search” or “Analogue Search” may not be shown.
Manual adjust
Configure various settings for each service using the Colour (R/G/Y/B) buttons.
Service | Service | Lock | CH skip | Old LCN |
no. | name |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lock | CH skip | Delete | Sort |
1Press a/bto select the desired service.
2Press the Colour button on the remote control unit corresponding with the item you want to reconfigure.
•The mark indicates the operation is set to on. Each time the Colour button is pressed, you can switch the corresponding operation on/off.
40
