Useful viewing functions
Option
Input label
You can label each input source with a custom description.
1Press bto select the desired input source from the “INPUT” menu, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.
3Press ?to display the software keyboard and select each character of the new name for the input source (page 15).
4Repeat the above until the name is fully spelt out, and then press @.
•The label can be six characters or less.
•When you want to set an input source name of less than six characters, select “Cancel”.
CH list
ATV
DTV
INPUT
TV
Switchable
HDMI 2
NOTE
•You cannot change labels if the input source is “TV”, “USB media” or “Home network”.
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
>“Terminal setting” > “Headphone/Audio out select”.
| Item | |
Headphone | Output audio through headphones. | |
|
| |
Audio out | Output audio through an A/V receiver or | |
surround audio controller. | ||
|
Regarding the headphone jack
•Use headphones with a stereo mini plug (
3.5 mm).
•Be sure to unplug headphones from the jack when they are not in use.
•The speakers do not output volume when headphones are plugged in.
•The “Audio” menu cannot be operated when headphones are plugged in.
•You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
30
CAUTION
•This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.
Selecting the HDMI picture size automatically
Option
HDMI auto view
NOTE
•If you select “Audio out” when a cable is inserted in the AUDIO IN terminal, the TV speakers are muted.
•When you select “Audio out”, you can adjust the TV sound volume with the Yl/kbuttons on the TV or the remote control unit.
This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI1, 2, 3 and 4 terminals.
1Press bto select the input source (“HDMI1”, “HDMI2”, “HDMI3” or “HDMI4”) connected to your HDMI device, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.
Item
Enable/Disable
Set whether or not to use “Wide mode” based on signal recognition, including an HDMI signal.
NOTE
•Refer to your external equipment operation manual for the above settings.
•When connecting a
47
