Sharp LC-60LE640X operation manual Enjoying 3D image viewing 3D setup

Enjoying 3D image viewing

3D setup
		3D still image effect setting
	Select the method for adjusting the 3D still image effect
EBasic operation
	(depth).

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set.

3D auto change

This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected.

Item

	3D mode is selected automatically when
Mode 1	a 3D signal is detected while viewing
	video from a VOD service or HDMI-
	connected equipment.
	3D mode is selected automatically when,
	in addition to detecting a 3D signal while
Mode 2	viewing video from a VOD service or
	HDMI-connected equipment, a video
	pattern with “Side by Side” or “Top and
	Bottom” format is also detected.
Off	Auto change is not performed.

NOTE

•3D signals may not be detected depending on the signal format.

3D depth control

Select the method for adjusting the 3D depth.

	Item
Auto	Adjusts the depth automatically.
Manual	Manually adjusts the depth using the
	function “Depth change”.

Item

Auto	Adjusts the still image effect (depth)
	automatically.
Manual	Manually adjust the still image effect
	(depth).

NOTE

•This function can be adjusted when viewing 3D still images in USB media mode.

•Even if you selected “Auto”, the 3D still image effect (depth) may not be correctly adjusted depending on the 3D still image.

•3D still images taken in macro mode will be displayed with excessive depth.

•If you experience discomfort while viewing 3D images, immediately discontinue viewing.

Viewing time info

This function allows you to display the elapsed time of 3D image viewing on the screen.

	Item
Yes	The elapsed time is displayed in one-
	hour increments after you start watching
	3D images.
No	Hide the time.

3D test

This function displays 3D images for testing the 3D operation. Clicking “Start” on the screen plays back 3D test images.

NOTE

•This function is only available when the input signal is 3D.

•This function is not displayed depending on the type of 3D signal.

NOTE

•If you press Bduring playback, the previous screen will be displayed.

Depth change

Adjusts the depth manually. “0” is the level where no adjustment is made.

NOTE

•This function is only available when “3D depth control” is "Manual".

2D s3D convert effect

You can adjust the 3D effect when converting images from 2D mode to 3D mode. Select a desired level of convert effect from e1 to e16.

NOTE

•This function is only available when converting 2D images to 3D images.

•When you use this function, image conversion on the TV will result in some differences in the original images and how they appear.

•2D images that have been converted to 3D images may be viewed only for personal use.

73