Russound ST2S ST2 TUNER SETUP MENU ST2 Chassis Setup Procedures, Factory Initialization Chassis

Press and Hold

Select button

ST2S TUNER PROGRAMMING

ST2 TUNER SETUP MENU

ST2 Chassis Setup Procedures

TUNER	SOURCE	UPDATE	FACTORY		SYSTEM	Chassis
SETUP	NUM	FIRMW	INIT		INFO	Setup
Menu	Procedure	Procedure	Procedure		Procedure	Menu
	Mode	Mode			Mode
	Band	Band
					Band
			This
	TUNER	HOLD	Procedure
			returns the			Mode
	#	MODE
						Band
			ST2 Tuner
			to its
			Factory
			settings
	Mode	After update				Mode
		cycle Power	Mode			Band
	Band		Band
	SOURCE		Are you sure
	NUM
		Start				Mode
		Update
						Band
			YES	NO
	Mode
	Band		Mode
			Band
		Cycle Power
			Please wait
			Cycle Power

1.Enter the Setup Menu by pressing and holding the SELECT button.

2.TUNER SETUP appears. Press MEM Up/Down until UPDATE FIRMW appears on the tuner.

3.Press MODE/BAND to enter the UPDATE FIRMW menu.

4.“Hold BAND” appears on the tuner.

5.While pressing and holding MODE/BAND, “After update cycle power” appears on the tuner display.

6.When “Start Update” appears on the tuner dis- play, start the update program. “Finished” appears on the computer screen when complete.

7.Cycle power to the tuner.

Factory Initialization (Chassis)

The Factory Initialization procedure allows the erasure of all programmed settings and returns

them to the factory default settings.

1.Enter the Setup Menu by pressing and holding the SELECT button.

2.TUNER SETUP appears. Press MEM Up/Down until FACTORY INIT appears on the tuner.

3.Press MODE/BAND to enter the FACTORY INIT menu.

4.“Are you sure” appears on the tuner. Using the Tune Up/Down buttons, view the “Yes” and “No” selections.

5.Press MODE/BAND to select. A “No” selection returns to the top of the Factory Init menu. A “Yes” begins the initialization.

6.“Please wait” appears on the tuner during the process and “Cycle Power” appears when com- plete.

7.Cycle power on the ST2S tuner.

29