ST2S TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Tuner Setup Menu for AM/FM
It is important to select the desired tuner (Tuner 2 for AM/FM) using the SELECT button BEFORE accessing the Tuner Setup Menus.
Memory Name (AM/FM)
A memory preset must be created and saved before it can be named (see page 21). Once it is saved, the preset’s Tuner #, Bank # and Memory
# must be entered in the following procedure.
1.Enter the Setup Menu by pressing and holding the SELECT button.
2.TUNER SETUP appears. Press MODE again.
3.MEMORY NAME appears on the tuner.
4.Press MODE/BAND.
5.Bank # appears.
6.Press the Tune Up/Down buttons to select the Bank #.
7.Press MODE/BAND to advance.
8.Press the Tune Up/Down buttons to select a Memory #.
9.Press MODE/BAND to advance. MEMORY NAME appears again.
10.Press MODE/BAND to access the Memory Name entry screen.
11.Press Tune Up/Down to select a character and MEM Up/Down to change a character posi- tion. Up to 12 characters can be entered one by one. A blinking cursor indicates the placement of the character being entered.
12.Press MODE/BAND when memory name is entered.
13.SAVE CHANGES will appear.
14.Press Tune Up/Down to select Yes or No.
15.Press MODE/BAND to save memory name. The Memory Name menu returns to the Memory
# prompt to name other presets, or press SELECT to return to the Memory Name menu start.
Bank Name (AM/FM)
A custom name can be assigned to each of the six banks of Tuner 2 (AM/FM).
1.Enter the Setup Menu by pressing and holding the SELECT button.
2.TUNER SETUP appears. Press MODE/BAND.
3.MEMORY NAME appears. Press MEM Up/Down until BANK NAME appears on the tuner.
4.Press MODE/BAND.
5.Bank # appears.
6.Press the Tune Up/Down buttons to select the Bank #.
7.Press MODE/BAND. BANK NAME appears again.
8.Press MODE/BAND to access the Bank Name entry screen.
9.Press Tune Up/Down to select a character and MEM Up/Down to change a character posi- tion. Up to 12 characters can be entered one by one. A blinking cursor indicates the placement of the character being entered.
10.Press MODE/BAND when bank name is entered.
11.SAVE CHANGES will appear.
12.Press Tune Up/Down to select Yes or No.
13.Press MODE/BAND to save bank name. The Bank Name menu returns to the Bank # prompt to name other banks, or press SELECT to exit the Bank Name menu.
Region (AM/FM)
The Region procedure assigns either US or Euro to the tuner. The difference between the two is that US FM frequencies operate in .2 MHz incre- ments, while European FM frequencies operate in
.05 MHz increments.
1.Enter the Setup Menu by pressing and holding the SELECT button.
2.TUNER SETUP appears. Press MODE/BAND.
3.MEMORY NAME appears. Press MEM
34
