ST2S TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Press Select button to select Sirius Tuner
Sirius Setup Menu Bank Name Procedure
Mode
Band
TUNER | SOURCE | UPDATE | FACTORY | SYSTEM | Chassis |
SETUP | NUM | FIRMW | INIT | INFO | Setup |
Menu | Procedure | Procedure | Procedure | Procedure | Menu |
|
|
Mode
Band
MEM | BANK | CONTROLLR | DIAGNOSTICS | FACTORY | SYSTEM | Sirius |
NAME | NAME | ID | Procedure | INIT | INFO | Setup |
Procedure | Procedure | Procedure |
| Procedure | Procedure | Menu |
|
|
|
|
|
|
Mode
Band
BANK # | Mode | BANK | Mode | SAVE |
NAME |
| |||
| Band | Band CHANGES? | ||
|
| Mode |
|
|
|
| Band |
|
|
|
| Selects |
|
|
|
| character |
|
|
Selects
character
position
Repeat
for each
character
in name
Mode Band
Controller ID (SIRIUS) | Factory Initialization (SIRIUS) |
The Controller ID procedure is used to identify the controller(s) that the SIRIUS tuner will respond to.
Note: For the SIRIUS module that is installed in the ST2S chassis, “All Controllers” will be the default setting.
Diagnostics (SIRIUS)
The Diagnostics procedure is for factory use only.
The Factory Initialization procedure allows the erasure of all programmed settings of the SIRIUS tuner and returns them to the factory default set- tings.
1.Enter the Setup Menu by pressing and holding the SELECT button.
2.TUNER SETUP appears. Press MODE/BAND.
3.MEMORY NAME appears. Press MEM Up/Down until FACTORY INIT appears on the tuner.
32