Russound ST2-KPKEYPAD CONTROLS, ST2-KPKeypad Operation, ST2S OPERATION, CH120

ST2-KP Keypad Operation

1Turning the keypad on/off

To activate the ST2-KP, press . Press to power down the keypad display. The keypad remains powered until the ST2S Tuner is turned off.

1Selecting the desired tuner

To select a different tuner, press and hold . (If the keypad has been hardware jumper-selected to Tuner 1 or Tuner 2, it will not switch between the two tuners.) The backlight color of the display will be green for Tuner 1 (SIRIUS) and amber for Tuner 2 (AM/FM). Each time a tuner is selected the display will refresh with the current station or preset for that tuner, and all subsequent button presses and memo- ry preset entries will be associated with that selected tuner.

2Selecting the desired band (AM/FM)

Push to switch between AM or FM band.

2Selecting a mode (SIRIUS)

Push to select a SIRIUS operating mode.

2Exiting a mode (SIRIUS)

Press and release until EXIT is displayed to exit the SIRIUS operating mode menu.

3Selecting the desired frequency or channel

Use and for manual tuning. To move quickly

through the channels, press and hold either or

for more than 1.5 seconds. European frequen- cies show in .05 MHz increments.

ST2S OPERATION

ST2-KP KEYPAD CONTROLS

4Selecting a Bank

To select a bank, select the desired tuner, then press

and hold or to select the desired bank. The bank name will show on the display.

4Recalling a Memory Preset

To recall a memory preset, press and release or

to scroll through the presets for the selected bank. (Memory presets must be stored for ST2-KP recall)

5ST2-KP Keypad Display

The 5-character backlit display shows frequency and band, plus SIRIUS channel and mode information. Messages scroll twice, then display the first 5 char- acters.

ST2-KP Keypad-Front Panel

5

CH120

	3
	2
	3
4	1

23