CONTROLS AND FUNCTIONS
■Controlling the TUNER functions
Set the component selector switch to SOURCE and then press TUNER to select “TUNER” as the input source.
4Numeric buttons
Use numbers 1 through 8 to select preset stations.
7BAND
Switches the reception band between FM and AM (see page 52).
8Cursor buttons u / d / j / i
Press j / i to select a preset station group (A to E) and u / d to select a preset station number (1 to 8)
(see page 56).
■Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
(U.S.A. model)
30 | 30 | Approximately 6 m (20 ft) |
|
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperatures, such as near a heater or stove
–places of extremely low temperatures
–dusty places
8
