Clarion Complete Guide to Features and Operations for the CZ309 CD Player

Basic Operations

●Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s subwoofer output terminal.

This adjustment can be performed only when the “S-W LPF” is set to “LPF 120”, “LPF 80” or “LPF 50”.

2-1. Select “S-W VOL”.

3-1. Press the [w] or [z] button to increases

or decreases the subwoofer volume.

∗The factory default setting is “0”. (Adjustment range: +6 to –6)

∗When the volume level is more than 30, the subwoofer volume adjustment value can not reach +6.

●Adjusting the high pass filter

2-1. Select “HPF”.

3-1. Each time you press the [w] or [z] button to select the setting.

The setting changes in the following order: “120” ↔ “THROUGH”

∗The factory default setting is “THROUGH” (through).

∗This is supported only with amplifiers

equipped with this function. Output is not supported from RCA cables.

Note:

•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.

Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.

∗The factory default setting is “OFF” (off).

1.Press and hold the [SOUND] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” appears in the display for 2 seconds.

2.Press and hold the [SOUND] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect.

Radio Operations

Listening to the radio

1.Press the [SRC] button and select the radio mode.

2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:

F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜ F1 (FM1)...

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the desired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.

2.Press the [x] or [v] button to automatically seek a station.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

●Quick tuning

Press and hold the [x] or [v] button for 1 second or longer to tune in a station.

●Step tuning

Press the [x] or [v] button to manually tune in a station.

Recalling a preset station

Atotal of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exists to store individual radio

stations in memory. Press the corresponding [DIRECT] button or the [w] / [z] button to recall the stored radio frequency automatically.

Manual memory

1.Select the desired station with seek tuning or manual tuning.

English

CZ309 11