Satellite Radio Operations
This function is available when a Satellite Radio Receiver is connected through the CeNET cable.
This unit can control the following satellite radio receivers:
•XM Satellite Interface Adapter
Clarion cable for CNP2000UC : CNPCLA1
•SIRIUS Satellite Radio Receiver : SIRCL3
•SIRIUS Satellite Translator Adapter :
Notes:
•When the function is differ depending to the connected receiver, they are distinguished by the following notations:
“XM”: for an XM Satellite Radio Receiver
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
•XM and the XM logos are trademarks of XM Satellite Radio Inc.
Confirming your SIRIUS ID
1.Press and hold the [DISP] button for 1 second or longer to display the ADJUST item.
2.Press the [x] or [v] button to select “SID DISP”.
3.Press the [ 
] button, the display will display the upper 6 digits.
4.Press the [w] or [z] button to switch
between the display for the upper 6 digits and lower 6 digits.
5.To return to the previous mode, press the [DISP] button.
Displaying channel labels
1.Press the [DISP] button to select the desired channel label.
Channel ➜ Category ➜ Title (Artist) ➜ Radio text ➜ Channel...
English
Selecting a Satellite Radio mode
1.Press the [SRC] button.
The system changes to the specified Satellite Radio mode.
Selecting a band
1.Press the [BND] button to select a band. This changes the reception band as follows:
•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...
•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...
●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.
•When the receiver is turned on the first time or after a reset: “UPDATING”
•When a channel is being tuned in (no signal is yet received):
XM: “LOADING”, SIRIUS: “LINKING”
•A channel without a broadcast has been selected:
XM: “– – – CH”, SIRIUS: “INVALID CH”
•A channel not covered by your contract: XM: “UPDATING”, SIRIUS: “CALL 888” ↔
Channel selection
1.Channels are selected with the [x] or [v] button.
∗For details, see the following operation descriptions.
Note:
•The audio output is muted and other button operations are not accepted during channel selection.
Tuning mode
There are two channel selection modes: quick tuning mode and step tuning mode.
●Quick tuning
1.Press and hold the [x] or [v] button for 1 second or longer.
●Step tuning
1. Press the [x] or [v] button.
CZ309 23
