Yamaha HTR-5960 owner manual Rev.Level

				SOUND FIELD PROGRAMS
Sound field parameter			Features
REV.LEVEL	Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
	stronger the reverberation becomes.
	Control range: 0 to 100%
	Level	Source sound
	(dB)
				60 dB
			Reverberation
					Time
		REV.DELAY	REV.TIME
DIALG.LIFT	Dialog lift. Adjust the height of the front and center channel sounds by assigning some of the
	front and center channel elements to the presence speakers. The larger the parameter, the higher
	the position of the front and center channel sound.
	Choices: 0, 1, 2, 3, 4, 5
2ch Stereo	2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi
DIRECT	stereo sound when playing 2-channel analog sources.
	Choices: AUTO, OFF
	y
	• The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and
	“TREBLE” are set to 0 dB (see page 39).
	• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
	channels and output from the front left and right speakers.
	• The low-frequency signals input from the front left and right speakers are redirected to the
	subwoofer in the following cases:
	– “LFE/BASS OUT” is set to “BOTH” (see page 88).
	– “FRONT SP” is set to “SMALL” (see page 86) and “LFE/BASS OUT” is set to “SWFR”
	(see page 88).
7ch Stereo	7-channel stereo center, surround left, surround right, surround back, presence left and presence
CT LEVEL	right levels. Adjusts the volume level of each channel in the 7-channel stereo mode.

SL LEVEL

SR LEVEL	Control range: 0 to 100%
SB LEVEL
PL LEVEL
PR LEVEL

PROGRAMS SOUND FIELD

77