8PRESET/TUNING/CH l / h, LEVEL +/–
•Selects one of the 8 preset station numbers (1 to 8) when “TUNER” is selected as the input source. The colon (:) is displayed in the front panel display (see page 52).
•Selects the tuning frequency when “TUNER” is selected as the input source. The colon (:) is not displayed in the front panel display (see page 52).
•Adjusts the level of the speaker channel selected using NEXT when “TUNER” is not selected as the input source (see page 42).
9MEMORY (MAN’L/AUTO FM)
Stores a preset station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning (see page 54).
0TUNING MODE (AUTO/MAN’L)
Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off) (see page 52).
AVOLUME
Controls the output level of all audio channels.
y
This does not affect the AUDIO OUT (REC) level.
BOPTIMIZER MIC jack
Use to connect and input audio signals from the supplied optimizer microphone in the “AUTO SETUP” procedure (see page 32).
C
PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with headphones (see page 40).
Notes
•When you connect headphones, no signals are output at the speaker terminals.
•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.
DSPEAKERS A/B
Turns on or off the set of front speakers connected to the FRONT A and/or B terminals on the rear panel each time the corresponding button is pressed.
ESTRAIGHT (EFFECT)
Turns the sound field programs off or on. When the “STRAIGHT” mode is selected,
CONTROLS AND FUNCTIONS
FPROGRAM selector
Selects sound field programs or adjusts the bass/treble balance in conjunction with TONE CONTROL (see page 39).
GTONE CONTROL
Adjusts the bass/treble balance of the front left and right, center, presence left and right and subwoofer channels in conjunction with the PROGRAM selector
(see page 39).
HINPUT MODE
Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections (see page 41).
IINPUT selector
Selects the desired input source.
JMULTI CH INPUT
Selects the component connected to the MULTI CH INPUT jacks as the input source (see page 44).
Note
The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with the INPUT selector on the front panel (or the input selector buttons on the remote control).
KVIDEO AUX jacks
Input audio and video signals from a portable external source such as a game console or a video camera (see page 27).
y
To reproduce the source signals input at these jacks, select
Note
The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.
INTRODUCTION
5
