Tuner Operations
Automatic presetting
You can start the automatic presetting from a selected preset number.
| DVD system’s |
| display panel |
1 | FM / MW |
2 | 02 |
3 | AUTO |
1Press SOURCE control to select “TUNER FM” or “TUNER MW”.
2Press 1 2 or use the numeric keypad
3Press and hold PROGRAM until "AUTO" appears.
➜If a radio station is stored in one of the earlier presets, the same radio station will not store under another preset number.
➜If no preset number is selected, automatic preset will begin from preset
(1) and all your former presets will be overridden.
Manual presetting
You can choose to store only your favourite radio stations.
1Tune to your desired radio station (see “Tuning to radio stations”).
2Press PROGRAM.
3Press 1 2 to select a preset number.
4Press PROGRAM again to store.
Selecting a preset radio station
●Press 1 2 or use the numeric keypad
➜ The waveband, preset number followed by radio frequency will appear.
Deleting a preset radio station
●Press and hold 9 until “MWXX DELETED” or “FMXX DELETED” appears.
➜ The current preset radio station will be deleted.
Changing tuning grid (not available
for all versions)
In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas).
The preset frequency step in the factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all previously stored preset radio stations.
1Press SOURCE repeatedly to select “TUNER FM” or “TUNER MW”.
2Disconnect the power cord from the power supply.
3While holding down SOURCE and S buttons on the front panel, connect the power cord to the power supply again.
➜The display will show "GRID 9" or "GRID 10".
Helpful Hints:
–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.
–The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
E n g l i s h
37
37 | 13/08/2004, 11:25 AM | |
|
| 3139 115 23251 |
