Philips LX8320 Connecting FM/MW antennas, Connecting a Progressive ScanTV, Connections, English

Connections

English

Step 5: Connecting a Progressive ScanTV

Step 6: Connecting FM/MW antennas

fix the claw
into the slot
➠	MW loop
	antenna
	1

2

IMPORTANT!

The progressive scan video quality is only available when usingY Pb Pr connection and a progressive scanTV is required.

Using Component Video jacks (Y Pb Pr)

1Use the component video cables (red/ blue/green - not supplied) to connect the DVD system’s Y Pb Pr jacks to the corresponding component video input jacks (or labelled as Y Pb/Cb Pr/Cr or YUV) on the TV.

2To hear the TV channels through this DVD system, use the supplied audio cables (white/red) to connect AUDIO- TV IN jacks to the corresponding AUDIO OUT jacks on the TV.

3Activate the progressive scan function, see page 32.

10

1Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.

2Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Helpful Hints:

–Adjust the position of the antennas for optimal reception.

–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.

001-045-LX8320-69-Eng2	10	3139 115 23251
		13/08/2004, 11:24 AM